Detecto Prodoc Scales With Column

TECHNICAL FEATURES

• Weighing capacity: 220 kg.
• Accuracy: 100 g.
• Screen: 5 digit, 7 segment, 25mm high LCD.
• Functions keys: zero, lock / release, units, store / recall, BMI, height / enter, on / off.
• Power: 6 “AA” Alkaline batteries (not included) or power adaptater delivred with the scale.
• BMI calculation (Body Mass Index).
• Adjustable locking feet.
• Bubble level for weighing on any surface.
• Sleep mode and an automatic shutoff.
• Memory function which enables to store and recall until 4 different weights.
• Medical Class III approved (periodical sticker).

OPTIONS

• Manual height rod.
• Digital height rod.
• 9 V adaptator for power input.

BATTERY OPERATION

• Low Battery 

When the batteries are near the point they need to be replaced, the display will show lobAt. If the battery voltage drops too low for accurate weighing, the scale will automatically shut off and you will be unable to turn it back on. When the lobAt message is displayed, the operator should replace the batteries or remove the batteries and plug-in the 9V AC/DC adapter.  

• Automatic Shutoff 

The Automatic Shutoff feature will turn the scale off after a period of inactivity (no motion or weight on scale) to prolong battery life. The period of inactivity for the automatic shutoff is selected during the setup process of the scale and can be set for up to nine (9) minutes. To turn the scale back on, you simply press the ON/OFF key.  

• Sleep Mode

The Sleep Mode feature also conserves battery power when the scale remains unused and will show SLEEP on the display to indicate the sleep mode has activated. The sleep mode feature requires that no key is pressed on the keypad and the scale to remain at the center of zero for a period of time to activate. The period of time for the sleep mode is also selected during the setup process of the scale and can be set for up to nine (9) minutes. When a key is pressed or weight is placed on the scale, it will wake up and return to the weight mode. 

OPTIONAL AC POWER ADAPTER

• To power the scale using the optional Medical device 9V AC/DC wall plug-in adapter (see Figure No. 25), connect the plug from the adapter into the power jack on the back of the scale base and then plug the power adapter into the proper electrical outlet. Refer to Figure No. 26. On models requiring 220 VAC, it is the customer’s responsibility to obtain the correct power adapter plug. The scale is now ready for operation. 

Tutorial